Products

Harnessing the magical properties of water

Crystal Blue Water Structuring Units

The Crystal Blue Water Structuring Units consistently prove their effectiveness in enhancing health and productivity for plants, animals, soils, flowers, fish and the environment…for all livestock and every agricultural crop. They also have been shown to provide a return on investment unequalled by any other agricultural product on the market today. These units are clearly among the most valuable water treatment and water conditioning tools available anywhere in the world – from the backyard to the greenhouse to large-scale commercial applications.

 

Ready to find out more?

¡Contáctenos hoy para aprender más!


CONTACT US

cb1


 

Commercial Applications

Agriculture – Livestock – Flowers – Fish

Guaranteed to Increase Bankable Profits By 20% or More Year After Year

pic3-harvest

5972338_orig

“No other commercial farm device we have ever seen provides such an incredible return on investment”

Reduces water consumption by 25% – 30%

Increases plant hydration and mineral uptake

Increases mineral uptake and nutrient density

Increases percolation rate and transpiration

Decreases evaporation and irrigation costs

Reduces the need for fertilizers and pesticides

Increases growth rate with up to 50% higher yields

This all adds up to Greatly Increased Profits

 

Ready to find out more?

¡Contáctenos hoy para aprender más!


CONTACT US

 


 

Livestock

Crystal Blue Water Structuring Units Puts Money in Your Pocket

Tens of thousands of acres, millions of chickens (including egg production) and countless cows, pigs and bees testify to the fact the Crystal Blue Water Structuring Units are a

SAFE + PRODUCTIVE + LUCRATIVE INVESTMENT Crystal Blue Water Structuring Units

Provide Livestock Growers With:

  • Increased Immunity to Disease
  • Increased Size and Strength
  • Increased Hydration
  • Faster Growth Rates
  • Increased Milk Production
  • Less Birthing Complications
  • Health Maintenance reduced by 30% or more
  • More Eggs/Bigger Eggs & Chickens
  • Mortality Rates reduced by 30-50%
  • Eradication of Anaerobic Bacteria and Odor

This All Means Greater Profitability Year After Year $80,000 Additional Profits in the First Year! An investment in a few Crystal Blue Structured Water Unit by a commercial dairy in the USA resulted in a return of $80,000 in additional profits in just one year. With no need for further investment or maintenance, these units will continue to generate profits for the Cedar Grove Dairy in Platte, South Dakota for generations to come.

60,000 Extra Eggs

“We invested $5,000 for water structuring units at our 42,000 bird operation. Livability went up five percent giving us about 2,000 more birds. All our birds started laying sooner and stayed at peak longer, which meant an extra 50,000 dozen eggs. Our earning increased by an average of $4.00 per bird.”

                                                 Marlon Hosteller, Hosteller’s Poultry Farm, Missouri, USA

 

  • Chickens started laying younger.
  • Eggs were up to size quicker and case weight came up faster.
  • Mortality was lower giving one farm 2,000 more birds in production over previous flocks.
  • Ammonia and manure smell disappeared
  • Faster growth rates; higher production at peak.
  • Peak production (at or above 96%) lasted three to four weeks longer.
  • Net earnings rose to approximately $10 per bird compared to $6.00 without structured water – for 42,000 birds.                                    

Poultry – Weight increase per chick: 18%; Better feed conversion efficiency, better heart and spleen weight, low abdominal fat content, immune status of birds found higher in terms of titre value (disease resistance). http://www.crystalblueindia.com/poultry-farm.php

Reduced feed consumption per bird = 45-56 grams.  http://www.crystalblueindia.com/poultry-feeds.php

 

Increased Milk Production

“Since installing the two-inch Crystal Blue unit on our farm’s main line we have seen an increase in milk production and general overall boost in grazing and crop vitality. The farm staff have also commented on the soft and sweet taste of the drinking water.  Frankly I am sold on the efficacy of the unit and would like to become a distributor if you don’t already have one in Hawaii or on Maui. Let me know your thoughts on that. Thank you for all your efforts”.  –Mark Damon, Maui Bees LLC – Hawaii, USA

Cedar Grove Dairy near Platte, South Dakota, has a herd of 500 Holsteins. Before installing two Crystal Blue Water Structuring Units, the dairy had an average peak milk production of 116.1 pounds per cow. The average peak performance was recorded monthly. The average peak performance increased in April, May and June. When last measured, average peak milk production had stabilized at 119.0 pounds per cow. We built three Broiler Chicken Barns in 2012. We sell our birds to a large buyer who purchases from 25 local producers in our area. In 2015, we installed three Crystal Blue Structured Water units that we bought from Leonard Hostetler.  Before installing the Crystal Blue Structured Watering units, our birds were typically rated as being average among all of the 25 producers, usually somewhere between #s 13 and 20 in the ratings.  After we installed the new units (one in each barn), our birds are now consistently rated in the top five among all of the buyers for quality and size.

                                Frank Swartzentruber, Cedar Grove Dairy near Platte, South Dakota, USA

 

(After eight weeks of using Crystal Blue Structured Water) the chickens were 56 weeks old, previously affected by respiratory problems in a pyramid shed that is 17-years old.

 

Chicken related Observations:

  1. Increased water consumption in 12% (this is good because it means that the chickens drank water whenever they desired. They need to be as comfortable as possible.)
  2. Increase in weight: 1.6%.
  3. Recovery after eggs laid increased more than 15% (meaning an increase in the number of chickens laying eggs).

 

Equipment related Observations:

  1. The sediments in the small containers, located before the nipple from where the chickens drink water, disappeared.
  2. There was a considerable reduction in the mineral buildup of the pipes.
  3. There was a considerable reduction in the mineral buildup in the nipples, recovering their functionality to 100%.

                                                                                       Patricio Gasaly, Chile

 

 

 

 

      All Purpose Commercial            All Purpose Commercial

(AP-1, AP-2, AP-3)                       (AP-6, AP-8, AP-10, AP-12)

 

Variable Dimensions                                    Variable Dimensions

 

Note: No filters or parts ever need replacing.

All Purpose (AP-1) – Heavy Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
​1 inch Stainless Steel, In-Line Unit – line sizes from 1/2 to 1 inch diameter.
Dimensions: 13.5 inches long; 5 inches wide; 36.5 pounds.

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

All Purpose (AP-2) – Commercial Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
2 inch Stainless Steel, In-Line Water Structuring Unit – line sizes between 1 and 2 inches diameter.
Dimensions: 19 inches long; 6 inches wide; 56 pounds.

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)


All Purpose (AP-3) – Commercial Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
three inch Stainless Steel, In-Line Water Structuring Unit – line sizes between two and three inches diameter.​
Dimensions: 19 inches long; six inches wide; 56 pounds.

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

 

NOTE: All units larger than AP-3 (AP-6 and above) are manufactured to order and can take up to ten weeks for delivery.

All Purpose (AP-6) – Commercial Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
Six inch Stainless Steel, In-Line Water Structuring Unit – line sizes between three and six inches diameter.​ NOTE: There are no four inch and five inch units.
Custom Order

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

 

All Purpose (AP-8) – Commercial (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
Eight inch Stainless Steel, In-Line Water Structuring Unit – line sizes between six and eight inches diameter.​

Custom Order

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

All Purpose (AP-10) – Commercial Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
Ten inch Stainless Steel, In-Line Water Structuring Unit – line sizes between eight and ten inches diameter.​

Custom Order

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

 

All Purpose (AP-12) – Commercial Duty (This unit will reduce the flow rate of the water by approximately 5% under very high pressure applications – 200 psi and above).
Twelve inch Stainless Steel, In-Line Water Structuring Unit – line sizes between ten and twelve inches diameter.​

Custom Order

($250 installation charge required for the first purchased unit to qualify for ten-year warranty)

 

CLICK HERE for instructions on how to install a Crystal Blue Structured Water Unit.

 

 

 

 

Homes & Small Gardens

 

 

For Home and Travel

Handheld/Faucet (HF-1)                Shower/Under Sink (SU-1)

 

          Please specify US or metric threads                     Please specify US or metric threads

 

Whole House Standard Pressure (SP-1)

 

Handheld/Faucet (HF-1) – Good for line pressures not exceeding 70 PSI (pounds per square inch such as you would find in the typical home. This unit can be attached to faucets (Please specify US or metric threads) or as a portable unit for traveling. NOTE: This unit should be rinsed with vinegar and water if used for any liquid (such as wine) other than water.

1 inch Stainless Steel, Portable or In-Line Unit – line sizes from 1/2 to 1 inch diameter.
Dimensions: 5.5 inches long; 1.8 inches wide; 2.5 pounds.

 

Shower/Under Sink (SU-1) – Good for line pressures not exceeding 70 PSI (pounds per square inch such as you would find in the typical home. This unit can be installed under sinks or connected to shower lines (Please specify US or metric threads) and will reduce the flow rate of the water under normal line pressures by approximately 10%.

1 inch Stainless Steel, In-Line Unit – line sizes from 1/2 to 1 inch diameter.
Dimensions: 5.5 inches long; 1.8 inches wide; 2.5 pounds.

 ($250 Optional Installation Charge)

 

Whole House/Standard Pressure (SP-1) – Good for line pressures not exceeding 70 PSI (pounds per square inch such as you would find in the typical home. This unit will reduce the flow rate of the water under normal line pressures by approximately 10%).

1 inch Stainless Steel, In-Line Unit – line sizes from 1/2 to 1 inch diameter.
Dimensions: 11 inches long; 3 inches wide; 11 pounds.

 ($250 Optional Installation Charge)

 

 

The Crystal Blue Water Structuring technology is arguably the finest available. Unlike other copy-cat type devices made of cheap plastics, PVC, harsh chemicals, radioactive materials and toxic glues, all of our water structuring units are computer designed and machined, individually hand-crafted precision instruments made of the finest food-grade NSF, ANSI and national and international plumbing code-compliant materials such as surgical grade stainless steel, pure copper and precision ground silica spheres along with our proprietary mineral mix.

No other device we have ever tested delivers comes close to delivering the results of our Crystal Blue Water Structuring unit. When it comes to return on investment – MONEY IN YOUR POCKET YEAR AFTER YEAR – we truly believe this will be the best purchase you will ever make.

They are manufactured with the finest materials, guaranteed for ten years, and designed to last for generations.

CLICK HERE for instructions on how to install a Crystal Blue Structured Water Unit.

 

 

 

INSTALLATION INSTRUCTIONS

 

Please read the instructions very carefully before attempting to install your unit. For the sake of simplicity, the instructions will show you how to install the AP-1 (1 inch). The AP-2 andAP-3 installations will obviously require larger adapter fittings. NOTE: The first commercial unit (AP-1 or larger) purchased for each new location must be installed one of our certified technicians (cost: $250) to qualify for your ten-year warranty. All subsequent units may be installed by your staff following the instructions from our crews.  

IMPORTANT:  THE UNITS CAN BE INSTALLED WITH WATER FLOW COMING FROM EITHER END -THEY ARE IDENTICAL AT EACH END AND WILL WORK EXACTLY THE SAME WAY

  1. Locate the water service line entering the home and turn it completely off.
  2. Drain the entire water system by opening one or more cold water faucets (cold water faucets are generally on the right side of the faucet unit) such as in your sink or bath tub. Leave them open until the water stops flowing to ensure that the water is completely turned off and the entire system is properly drained.

Leave the faucet(s) open until your installation is complete.

  1.  Your AP-1 Water Structuring Unit may be installed on any ¾ to 1 inch diameter copper, PEX, CPVC, or PB tubing. All installation parts for your unit may be obtained from a local plumbing supply or home improvement center. Typical home plumbing is done with PEX, Copper or PVC.For any installation other than the above, please substitute the appropriate fittings in one or more of the various configurations mentioned below.

(A) Nipple – (B) Reducer — (C) Shark Bite – (D) Unions

(E) PVC Nipple – (F) Assembled Unit Bushing Connector

  1. Use the appropriate threaded nipples (Photo 1); or the 3/4” reducer bushing adapters

(Photo 2); or the Shark Bite connector (Photo 3), where needed. Connect the unions (Photo 4) on each end of the Water Structuring Unit. Assemble all components (Photo 5) using Teflon tape on all male threads. Wrap the pipe tape completely around all the male threads at least three layers deep as this will insure a water tight seal.

  1. To measure the amount of water line you will need to cut before you install the unit, first measure the full length of the assembled water structuring unit with its connectors attached (Photo 6). Then, depending on the couplings used, you will subtract approximately two (2) inches off of the measured length of the assembled water structuring unit when you cut the water line.
  2. Note: Due to the heavy weight of the Crystal Blue Water Structuring unit, it must be properly supported so as to not bend or even break the waterline. Because of the variety of circumstances in installation, we are unable to provide you with the appropriate hardware for that purpose. We therefore suggest that you consult with your local plumbing supply store or an experienced plumbing professional for assistance.
  3. Hold the assembled Water Structuring unit in place over the spot where the water line is to be cut to ensure that it will fit correctly.
  4. Use an appropriate cutting tool to cut the pipe to the length previously determined in Step 5. Have a towel available to soak up any residual water that may drain when the water line is cut. Make sure to thoroughly clean and deburr the edges of the cut.
  •                           (2)                           (3)                            (4)                      (5)                         (6)
  1. Keep the section of removed waterline for later use as a bypass in case your Water Structuring Unit is to be removed at a later date.
  2. If the water line is made of PEX tubing, then the Shark Bite tube support liner must also be used. The tube support liner acts as an internal support for the end of the tubing.
  3. Make sure that that there are no scratches, gouges or any form of damage on the outside of the tubing at least one inch (25.4 mm) within or around the cut end. Damage in this area may cause leakage. Check the fittings for any signs of damage or foreign objects.
  4. Make sure that the cut just you made at the end of the tube is square and clean for one inch from the cut down the outside length of the tubing. Then clearly mark the insert depth on the outside of the tubing. This mark is used to ensure that the joint is inserted to the proper depth.
  5. Push the Shark Bite fittings onto the ends of the cut tube or pipe, keeping in mind that the fitting will grip before it seals. Make sure that the tubing or pipe is inserted all the way into the fitting until the end is fully seated into the internal tube stop and all the way up to the mark you made in Step 8. To make sure that the seal is seated correctly, simply strike the connector with a firm strike of the palm of your hand or a semi-soft blunt tool such as the handle of a hammer or block of wood.
  6. Make sure that you can visibly see the black rubber O-ring on the top of both of the ¾ inch union connections.
  7. Place the structuring unit between the union connections and hand tighten the unions.

(If tools are needed to tighten the unions, please do so gently. No need to over tighten)

  1. Close all of the cold water faucets that you opened in Step 2.
  2. Turn on the water service supply line slowly and inspect the unit installation to ensure that there are no leaks.
  3. Slowly open the cold water faucets again to purge all of the air out of the waterline until the water runs smoothly.
  4. Close the cold water faucets and carefully check for leaks again. If drips are found, simply snug up the fittings where needed.
  5. The Crystal Blue Water Structuring Unit will clean calcium and other minerals deposits in your water pipes and appliances that use water. Consequently, all existing deposits need to be flushed as much as possible from your water heater holding tank (if you have one) in the coming weeks.
  6. Flush your water heater by attaching a garden hose to the drain valve on your water heater. Route the hose to the outside of your home or into a suitable floor drain. Then open the water heater drain until you can no longer see or feel materials discharging into the drain water.
  7. When the water is running clear and free of loose debris, close the water heater drain valve. Loose deposits may also build up at faucet aerators and screened washers on washing machine hoses. These may need to be cleaned periodically until all foreign deposits are removed or dissolved.
  8. Chunks of deposits in cold water pipes may get lodged in the valves of toilets and in the sprayer wand of your dishwasher. It will eventually dissolve and wash away although you may need to assist the process if clogging of spray nozzles occurs.
  9. Steps 16 and 17 may be repeated as necessary until no more debris is passing in the discharged water.

IMPORTANT!

If you find that any part of these instructions are confusing to you, please contact us for further assistance. If you feel these instructions or installation procedures are beyond your scope of experience, please contact a qualified plumbing service company.

 

 

 

Installs Easily on Existing Irrigation Systems

Simply insert into pipes using standard fittings.

                                                                                                    Vijay Foundation

 

                                        Tamil Nadu Agricultural University

 

 

NOTE: The installation of Crystal Blue Water Structuring Units is relatively simple and can be safely undertaken by any competent plumber or worker familiar with the maintenance of commercial irrigation systems. However we will send one of our certified technicians to your location anywhere in Ecuador to install your first unit (for an additional cost of $250), train your staff and activate your ten-year warranty. All subsequent units may be installed by your crew following the instructions from our technician.